Aluminum Fence Cost Per Foot (2026): Installed Prices

Home » Fence Cost » Aluminum

Prices are 2026 national installed ranges. Grade matters more in aluminum than in most materials: residential, commercial and industrial series differ in wall thickness and warranty. Confirm the series you are quoted.

Get 3 free aluminum fence quotes →

How much does an aluminum fence cost per foot in 2026?

Aluminum fencing costs $25 to $60 per linear foot installed in 2026, and the national average for ornamental residential work sits at $28–$45 per foot. Style drives most of the variation: a basic two-rail picket starts near $25, ornamental designs with finials and decorative scrolls climb 25–40% higher, and aluminum privacy panels occupy a middle band. Because panels are light, labor runs lower than for iron or heavy steel.

Is aluminum cheaper than wrought iron?

Yes — aluminum runs 25 to 40% below wrought iron at comparable styles, averaging $28–$45 per foot against $50–$85 for iron. The visual difference is minimal once powder-coated black, which is exactly why ornamental aluminum has taken over so much of the market that iron once held. What you give up is raw structural strength: iron resists impact and forced entry better, and true wrought iron can outlast aluminum by decades.

The maintenance ledger runs the other way and often decides it. Iron needs $5–$10 per linear foot each year in painting and rust control; aluminum needs effectively none because it doesn't rust. Across a 20-year hold on a 150-foot run, that upkeep alone can exceed the original price gap. For a full breakdown see our wrought iron fence cost guide.

How much does a 4-foot aluminum fence cost?

A 4-foot aluminum fence costs roughly $21 to $37 per linear foot installed, about 15–20% less than the same style at 6 feet. Four feet is the most common height for front yards and pool enclosures, where visibility matters more than screening. Stepping up to 6 feet raises both material and labor, and 8-foot aluminum is usually reserved for commercial applications where wind load requires heavier posts.

Does aluminum work well on sloped ground?

Better than most rigid materials. Many aluminum systems are rackable, meaning the panel can flex to follow a grade without stepping it down in sections. That's a practical advantage over vinyl, which must be stepped, and it usually keeps the added labor on a slope closer to 20–35% rather than higher. Ask whether the system quoted is rackable and to what degree, since rackability varies by manufacturer and panel design.

What does an aluminum pool fence cost?

An aluminum pool fence costs $30 to $50 per linear foot installed, and the premium over a standard picket covers code compliance rather than looks. Pool barriers generally require a minimum 4-foot height, self-closing and self-latching gates, and picket spacing tight enough that a child cannot pass through. Aluminum is a favorite for pools because it satisfies those rules while keeping sightlines open, and unlike steel it will not rust in a chlorine-heavy, wet environment.

How long does an aluminum fence last?

An aluminum fence lasts 30 to 50 years with almost no maintenance, and the powder-coated finish is what determines where in that range it lands. The material itself does not rust, which is why aluminum performs particularly well in coastal and humid climates where steel and iron struggle. Marine-grade alloys with dip-coated finishes push toward the upper end. The realistic failure modes are dents from impact and finish wear, not structural decay.

Compare local aluminum fence installers — free →

What extra costs should I plan for?

• Gates: $300–$800 each installed, more for self-closing pool hardware.
• Custom color: powder coating beyond standard black adds $2–$4 per foot.
• Permit: $50–$200, and near-certain for pool enclosures.
• Old fence removal: $3–$5 per linear foot.
• Sloped installation: 20–35% more labor even with rackable panels.

Frequently asked questions

How much does 100 feet of aluminum fence cost?

Roughly $2,800 to $4,500 installed for standard ornamental aluminum at 6 feet. A 4-foot picket run of the same length drops closer to $2,100–$3,700, and adding a single gate puts $300–$800 on top.

Does aluminum fencing provide privacy?

Standard ornamental aluminum does not, since the pickets are spaced. Aluminum privacy panels exist at $27–$36 per foot and use tight slats or solid panels, but if full screening is the goal it's worth comparing against wood or vinyl, which do it more cheaply.

Can an aluminum fence be repaired if it dents?

Individual pickets and panels can usually be replaced without dismantling the run, which is one of aluminum's practical advantages. Match the series and finish when ordering replacements, since powder coat shades vary between manufacturers and production batches.

Is aluminum fencing good for coastal properties?

Yes, it's one of the better choices. Aluminum does not rust, so salt air that degrades steel and iron has little effect. Marine-grade alloys with quality dip-coated finishes are worth the premium within a mile or two of the coast.

Is aluminum fence cheaper to install than wood?

Not upfront — wood privacy runs $20–$50 per foot against $25–$60 for aluminum. Aluminum wins over time by skipping the staining, sealing and board replacement wood requires, so the total cost of ownership usually favors aluminum past the first decade.